Pressure Sensors Stainless Steel SPS 1000 Z不锈钢压力传感器
Pressure Sensors Stainless Steel SPS 1000 Z不锈钢压力传感器具有电压输出百分率、优良的耐化学腐蚀性、优异的长期稳定性、较高的耐化学性的特点。
Features 特点
- ratiometric output signal (0,5 … 4,5V) 电压输出百分率
- excellent chemical resistivity 优良的耐化学腐蚀性
- excellent long term stability 优异的长期稳定性
- high chemical resistance 较高的耐化学性
Applications 应用
- pneumatic 气胎
- hydraulic 液压
- electronic pressure switches 电子压力开关
- electronic pressure transmitters 电子压力转换器
Features 特点
- ratiometric output signal (0,5 … 4,5V) 电压输出百分率
- excellent chemical resistivity 优良的耐化学腐蚀性
- excellent long term stability 优异的长期稳定性
- high chemical resistance 较高的耐化学性
Applications 应用
- pneumatic 气胎
- hydraulic 液压
- electronic pressure switches 电子压力开关
- electronic pressure transmitters 电子压力转换器
参数说明书下载链接：/filedownload/SPS 1000 Z
| Technical specifications技术规格 | |
| Supply voltage 供电电压 | 5 V ± 0.5 VDC |
| Power consumption | < 10 mA typ. Rload > 2 k) < 50 mA max. |
| Output signal 输出信号 | 0.5...4.5 V ratiometric |
| Kalibrierfehler精度 | ± 1 % / FS |
| Therm. offset shift 热偏移量 | 0 ± 0.08 % FS/K (0 ... 80 °C not compensated) |
| Therm. span shift热稳定性 | 0...−0.05% FS/K (20...80 °C) |
| Sample rate采样速率 | 1 kHz typ. / 0.5 kHz min. |
| Insulating resistor绝缘电阻 | >100 MOhm @ 500 VDC, RT, 70 % rH |
| Body material主体材质 | Stainless steel |
| Operating temperature工作温度 | −40 ... +125 °C |
| Storage temperature贮存温度 | −40 ... +125 °C |
| Mechanical and electrical characteristics are customisable. Specifications are subject to change without notice |
|
| PRESSURE RANGE (BAR) 压力值 | LONG THERM STABILITY * 长期热稳定性 | LINEARITY /HYSTERESIS (TYP./MAX.) (% FS) **线性度/回差 | Burst pressure 破裂压力 | OVER-PRESSURE (BAR) *** 极限压力值 | VACUUM CAPABILITY (BAR)真空特性 |
| 10 | ± 0.6 | ± 0.25/0.6 | ≥ 10 | ≤ 15 | −1 |
| 25 | ± 0.5 | ± 0.25/0.6 | ≥ 10 | ≤ 35 | −1 |
| 40 | ± 0.5 | ± 0.25/0.6 | ≥ 10 | ≤ 60 | −1 |
| 100 | ± 0.5 | ± 0.2/0.5 | ≥ 10 | ≤ 150 | −1 |
| 200 | ± 0.5 | ± 0.2/0.5 | ≥ 10 | ≤ 300 | −1 |
| 300 | ± 0.4 | ± 0.2/0.5 | ≥ 10 | ≤ 450 | −1 |
| 400 | ± 0.4 | ± 0.2/0.5 | ≥ 10 | ≤ 600 | −1 |
| 600 | ± 0.4 | ± 0.3/0.5 | ≥ 10 | ≤ 900 | −1 |
| 1000 | ± 0.4 | ± 0.3/0.5 | ≥ 10 | ≤ 1350 | −1 |
|
* 1000 hours @ 125 °C | 50 million pressure cycles @ 25 °C, 10 – 90 % FS @ 2.5 Hz | 50 thermal cycles +125 °C /−40 °C, 2 K/min. ** For indipendent linearity 10 points are measured and compared to an ideal straight line. | For all measurements, DUT’s are mounted in Metallux standard Housing according to "mounting proposal SPS 1000". ***Over-Pressure indicates the maximum (short time < 1 s) operating pressure within no irreversible damage to the printed circuit are expected. |
|||||
| Sample Order 订货样本 | ||
| Type型号 | Pressure range in bar压力值 | Electrical connection (acc. to drawing)电气连接 |
| CPS 1000 Z | 100 bar | Solder pads |
| Other dimensions and electrical specifications on request. | ||
